Products

Enamel GF-1426
October 2, 2018
Enamel QC-7101 BB
October 2, 2018

Enamel GF-92 XC, GS

Categories: ,

Enamel GF-92 XC, GF-92GS
GOST 9151-75

Application area

Paints GF 92 XC and GF 92 HS differ in their electrical insulating properties. They are intended for coating and finishing windings and parts of electrical machines and apparatus with insulation of the heat resistance class “B”

Enamel GF-92HS is designed to cover the fixed windings of electrical machines, and GF-92GS – to cover the fixed and rotating parts of the windings of electrical machines and apparatus.

 

Properties

  • High electrical insulation performance
  • Good mechanical performance
  • Good oil resistance
  • Glossy surface

 

Application

The metal surface should be dry, free from dust, rust, grease and other contaminants. Enamel is applied by spraying, dipping or pouring. Enamel must be thoroughly mixed throughout the volume of the container, then filtered through a sieve with a mesh 02-01. Solvent, xylene, toluene, 1: 1 mixture of xylene with white spirit can be used as a solvent. When working, use special protective equipment (respirator, rubber gloves). It is forbidden to work near an open source of fire.

Specifications

Indicator

GF-92HS

GF-92GS

Colour

Gray

Red brown

Gray

Conditional viscosity at 20 ° С according to VZ-246 with a nozzle diameter of 6 mm

20 – 70

Drying time, h, not more: – at (20 ± 2) ° С to degree 3- at (20 ± 2) ° С to degree 4- at (105-110) ° С to degree 4

24

120

3

Dielectric strength of film at ( 20 ± 2) ° С , MV / m, not less

thirty

Specific volume electrical resistance at (20 ± 2) ° SOM.m, not less Gray-1x1011Kr.-kor.-1h1010

1×1011

Instructions for use enamels

Surface preparation

before dyeing

The metal surface should be dry, free from dust, rust, grease and other contaminants.

Application Methods

 Spraying, dipping, pouring.

Enamel preparation

 to application:

Preparation Procedure:

Enamel is thoroughly mixed.

Filtered through a 02-01 sieve.

Diluted to working viscosity:

(24-28) s – when spraying,

(30-40) s – when applied by dipping or pouring;

Solvents

Solvent, xylene, toluene, 1: 1 mixture of xylene with white spirit

Dry film thickness

1 layer – (18-23) microns

2 layers – (35-50) microns

Enamel consumption

(100-150) g ​​/ m ?;

Warranty period of storage

12 months from date of manufacture 

up