PF-266 alkyd enamel for the floor is intended for painting floors and other wooden surfaces that are used indoors.
It has a good covering power. Forms a durable glossy coating resistant to abrasion and detergents.
The surface to be treated must be dry.
– Grind new surfaces, remove dust.
– Remove fragile parts of old paintwork coatings from painted surfaces.
Defects and irregularities to eliminate with putty on wood. Sand, clean from dust and dirt.
Before using the enamel, mix thoroughly, if necessary, dilute to working viscosity with white spirit, solvent or their mixture in a 1: 1 ratio. Enamel applied in 1-2 layers. The second layer is applied after the first layer has dried for 24 hours.
brush, roller, spray gun.
at a temperature of + 20 and a relative humidity of 65%, the drying time of one layer of enamel is 24 hours.
Enamel consumption for single-layer coating -100-180 g / m2, depending on the color and type of surface
Enamel is stored and transported in a tightly closed container, protecting from moisture and direct sunlight. Keep away from fire!
When carrying out painting works, as well as after their completion, it is necessary to ventilate the room thoroughly. Wear rubber gloves to protect hands.
Tan brown red brown
Warranty period of storage 12 months
0.9 kg, 2.8 kg, 50 kg