Enamel KCh-7101BB salad
(TU 6-10-1847-81)
COMPOSITION:
Suspension of pigment and fillers in a solution of thermoplastic elastomer DST-ZOR in toluene and xylene with the addition of phenol-formaldehyde and epoxy resins.
APPOINTMENT:
For protection of various metal alloys at planimetric dimensional etching.
SPECIFICATIONS:
The appearance of the film | matt rough surface |
Conditional viscosity by viscometer VZ-246 with a nozzle diameter of 4 mm at a temperature of (20.0 ± 0.5) ° C, s, no less | 70-165 |
Mass fraction of nonvolatile substances,% | 32-36 |
Drying time to degree 3 at a temperature of (20 + 2) 0С, h, not more | 20 |
The resistance of the coating to the static effect of a 15% solution of sodium hydroxide at a temperature of (85 + 2) 0 С, h, not less | five |
The ability of the film to be removed from the substrate | after the cut should be easily removed from the substrate |
APPLICATION:
Enamel is applied by spraying. If necessary, diluted with toluene, xylene.
STORAGE:
Warranty period of storage 6 months from the date of manufacture.