Enamel HS-413
October 2, 2018
Enamel HV-124
October 2, 2018
Enamel HS-119
Composition: Type: based on a copolymer of vinyl chloride with vinyl acetate and an alkyd-acrylic resin with the addition of a plasticizer. The coating system, consisting of two layers of XC 119 enamel, applied to the surface primed with XC 059 primer, retains its protective properties in a temperate climate for 6 years up to A31 points. In cold climates, this coating system retains its protective properties up to points of no more than A31, decorative – up to points of no more than AD2.
In tropical climates, a coating system consisting of a single layer of primer applied to a phosphated surface and two layers of XC 119 enamel retains its protective properties up to A31 points. It is allowed to use primers GF 0119, FL 03K, XC 10, XC 068. The enamel film is resistant to temperature changes from -50 ° C to + 60 ° C. The film is uniform, smooth, matte or semi-matte, without wrinkles, smudges and foreign inclusions. Warranty period of storage – 6 months from the date of manufacture.
Purpose (ХС-119)
ХС 119 is designed to protect pre-primed surfaces of railway cars, tanks, bridges and other metal structures used in atmospheric conditions of various climatic regions.
Application
- Before use, XC 119 enamel is thoroughly mixed and diluted to a working viscosity with solvent R-4. Enamel is applied by pneumatic and airless spraying. Consumption for single-layer coating – 120-130 g / m ?.
Specifications (XC-119)
| No | Name of the indicator | Value |
| one | Film color | Must be within approved color swatches. |
| 2 | The appearance of the film | Homogeneous, smooth, matte or semi-matte, without wrinkles, drips and foreign inclusions. |
| 3 | Hookability of the dried film, (g / m?) | White -100; Light gray – 100; Gray – 80; Red-brown – 45;
Black – 30. |
| four | Conditional viscosity according to the viscometer of the type VZ-246 with a nozzle diameter of 4 mm, at a temperature of (20.0 ± 0.5) ° C, not more than, (s) | 35 – 50 |
| five | Mass fraction of nonvolatile substances, (%) | black – 27-33; white, gray – 35-39; other colors – 34-39. |
| 6 | Milling degree, not more, (µm) | white – 30; other colors – 35. |
| 7 | Drying time to degree 3, (h) | at a temperature of (20 ± 2) ° С – 1.5; at a temperature of (70-75) ° С – 0.5. |
| eight | Enamel film elasticity at bending no more, (mm) | one |
| 9 | The hardness of the film is not less than the device type, (usm.) | M-3 – 0.4; TML – not standardized. |
| ten | Film durability at impact on the U-1 device not less, (cm) | 50 |
| eleven | Adhesion of film no more, (points) | 2 |
| 12 | Resistance of a film to static influence not less, (h) | water – 6; mineral oil – 24. |
