Products

Enamel HS-119
October 2, 2018
Enamel HV-16
October 2, 2018

Enamel HV-124

Composition: Based on chlorinated polyvinyl chloride resin and alkyd resin with the addition of a plasticizer. 

Categories: ,

Properties

Enamel HV-124 has excellent wear-resistant properties. Enamel HV-124 in 3 layers, in a temperate climate, it has been suitable for 6 years. FL-03K in 2 layers. In this case, the surface must retain its protective properties for 3 years. In cold climates, it can be primed with an AK-070 or VL-02 primer with an addition of aluminum powder. This is an estimate of the coverage of 4 years. Film, after wrinkles, marks, smudges and foreign inclusions.Warranty period of storage – 1 year from the date of manufacture.

 

Purpose (HV-124)

 

HV-124 paint is applied to metal surfaces.

 

Application

 

The surface must be dry and free from dirt and dust. It should be noted that it should be thoroughly mixed with R-4A. Enamel is applied by pneumatic and airless spraying. Allowed to apply enamel by electrostatic spraying. Consumption on 2 layers: gray – 275 g / m2; protective – 290 g / m? Work in personal protective equipment (respirator, rubber gloves). Prevent paint from entering During the work, ensure a constant flow of fresh air. Do not carry out work.

 

Technical characteristics (HV-124)

 

Name of the indicator Value
1. Film color Protective gray
2. Appearance After drying, the film should be homogeneous, without wrinkles, drips and foreign inclusions.
3. VZ-246 with a nozzle diameter of 4 mm at a temperature of (20 ± 0.5) ° C, s 35 – 60
4. Mass fraction of nonvolatile substances,% 27 – 33
5. Grinding degree, µm, not more than thirty
6. Hiding power of protective film of gray 6050
7. Drying time at a temperature of (20 ± 2) ° C, an hour, not more than 3 degrees 224
8. Flexural elasticity of the film, mm, not more one
9. Film hardness by pendulum device M-3, conventional units, not less than By pendulum device TML type (mA) 0.4 is not standardized
10. Adhesion of film, points, not more 2
11. Film durability at a temperature of (20 ± 2) ° C a static effect to: water-solution of soda ash of industrial oil
gasoline
242424
eight 

 

up