Ingredients: Enamel is a suspension of pigments in a lacquer based on vinyl chloride with vinyl acetate with the addition of a hardener.
Purpose (XC-717)
To protect against corrosion of metal and reinforced concrete structures exposed to p-ra mineral acids, alkalis, salts, corrosive gases (SO2, CO2, NH3, NO2), petroleum products (except benzene and toluene), etc. chemical reagents with a temperature of not higher than 600, operated in atmospheric conditions of different climatic regions, as well as indoors.
Application
Brush, paint sprayer (on clean steel surfaces).
Specifications (XC-717)
Name of the indicator | Value |
Coating color | Silver, shade is not standardized |
Appearance | after drying, the enamel should form a smooth semi-gloss coating. |
Conditional viscosity by viscometer VZ-246 with nozzle diameter 4 mm, at (20 ± 0.5) ° С, s | 70-110 |
Mass fraction of nonvolatile substances,% | 34 ± 2 |
Drying time at (20 ± 2) ° С, h, not more than degree 1
to degree 3 |
0.52.0 |
Coating strength at impact on U-1 device, cm, not less | 50 |
Bending elasticity of the coating, mm, not more | one |
Hiding power of the dried coating, g / m2, not more than: | 75 |
Adhesion of coating, points, not more | 2 |
Coating hardness by pendulum device, not less: type M-3, standard unit type TML (pendulum A), rel. units | 0.3 norm Opt-e necessarily |
Coating resistance to static exposure to petrol at temperature (20 ± 2) ° С, h, not less | 72 |