Products

Enamel ML-1214 ME
October 12, 2018
Enamel HV-16 R
October 12, 2018

Enamel HV-16

Type:  Enamels XB-16 and XB-16 R are a suspension of pigments and filler in a solution of perchlorovinyl and glyptal resins in a mixture of volatile organic solvents with the addition of plasticizers.

Scope:  Enamels are designed for painting primed metal surfaces, concrete and reinforced concrete structures, as well as wood and fabric surfaces. 

Categories: , Tag:

Specifications :

No The name of indicators Requirements TNPA
Enamel HV-16 Enamel HV-16 R
one Enamel coating color: 
 

 

 

 

 

– red

 

– Orange

– lemon yellow

– dark cream

– gray-green

 

 

– gray-blue

– blue

– dark brown

– gray-brown

– protective 760

– dark gray

– gray 842

– black, matte black, pink-beige, pistachio, white, silver, dark green, light gray

– brown and beige

– greenish blue

– greenish yellow

– light lemon

-green-green

– salad

– blue

Must be selected within the color catalogs or “Card index”
9, control sample
121, 128220, 221

226, 233

365, control sample

453, 454

483, 484

666, 667

675, 676

760, 761

817, 824

842, 843

on control samples

 

RAL 1011

RAL 5001


 

 

 

 

 

 

249, 266

268, 269

348, 349

371, 372

408, 409

 

 

 

 

 

– light blue gray 518
– red-brown– dark beige

– protective 736

– White Night

– green moss

– copper brown

––

410, 411518, 519
603, 606683, 687

736, 737

858, 859

RAL 6005

RAL 8004

2  The appearance of the enamel coating It should be a form, it should not be wrinkles, pock marks, drips and foreign inclusions.
3 Viscometer with a nozzle diameter of 4 mm (VZ-4) at a temperature of (20.0 ± 0.5) ° C, s: gray-brown, protective 760, dark gray, red, gray 842, gray – green, gray, blue, black, silver, brown, beige
, yellow, blue, orange, pistachio, white, pink 5001gray 518, light lemon, salad, dark beige, blue, bluish green, red-brown, copper-brown RAL 8004

white night, greenish yellow, light blue, protective 736, green moss RAL 6005

 

 

 

16 – 40

 

 

 

24 – 48

 

 

 

 

 

 

 

 

 

 

 

16 – 40

 

24 – 28

four Mass fraction of nonvolatile substances,%: – black
– black matte– red

– silver

– protective 760, brown-beige RAL 1011

– dark gray

– gray-blue

– gray-brown, gray 842

– lemon yellow

– gray-green, dark brown

– blue, dark green, greenish-blue RAL 5001

– orange

– pistachio, light gray

– pink beige

– white, dark cream

– red-brown, copper-brown RAL 8004

– gray 518, light lemon, salad, dark beige, blue, bluish-green

– white night, light blue, greenish-yellow, protective 736

– green moss RAL 6005

14 – 17
16 – 2017 – 21

18 – 23

20 – 26

21 – 28

21 – 27

22 – 28

23 – 27

24 – 27

24 – 28

24 – 29

26 – 30

29 – 31

25 – 29

 

 


19 – 25

 

20 – 26

 

26 – 30

24 – 28

five H / m 2 , not less than black, matte black
, green – blue, greenish blue RAL 5001– protective 760, dark gray, dark brown, dark green, gray blue

– light gray

– gray-brown, gray 842, copper-brown RAL 8004

– gray-green

– red, orange

– pink beige, dark cream

– white

– lemon yellow, pistachio

– gray 518, blue, bluish-green, protective 736, salad

– red-brown, copper-brown RAL 8004, green moss RAL 6005

– light blue

– greenish yellow

– white night, light lemon, dark beige

thirty
70 

75

80

 

90

95

110

135

150

160

 

 


 

 

 

50

 

60

75

80

130

6  Drying time to degree 3 at a temperature of

(20 ± 2) ° С, h, not more

1.5
7 Bending elasticity of the coating, mm, not more one
eight Acid number of aqueous extract, mg, not more than 0.2
9 Degree of grinding of enamels (except silver), microns, not more 35
ten Coating strength at impact on U-1 device, cm, not less 50
eleven Adhesion of coating points 2
12 Coating hardness by pendulum device type TML (pendulum A), relative units, not less 0.2
13 The durability of the coating at a temperature of

(20 ± 2) ºС, h, at least the static effect: distilled hydrotransformer oil

2424
14 UHL 1, years, not less
T1, years, not less
five
3

 

 

 

Advantages:  ХВ-16 and ХВ-16 Р enamels Р – quick-drying, dry at room temperature. Atmospheric conditions and indoors conditions. Differ in high water and weather resistance.

 

 

 

Surface preparationMetal surfaces  before enamels should be primed with primers such as GF, VL, FL, XB, XC or EP. It is important that the surface preparation be taken into account.

GOST 9.402.

 

The surface was mechanically cleaned, degreased and dried. It should be checked for compatibility. The coating must be removed.

 

The color of water should not be below 3 ° C.

 

The Surfaces Wooden  a must cleaned up the BE of resinous Substances, dried, sanded to the remove lint and dust. Remove dirt, dust and surface.

 

Concrete and reinforced concrete surfaces  should not be clean, dry, strong, without cracks, loose sections, dust and dirt. If necessary, the concrete and reinforced surfaces are cleaned with a dry method (brushes) and dedusted.

 

Coloring is not allowed during wetlands.

 

 

 

Application : Before use, R-5, R-5A or R-4 (GOST 7827) diluted with solvent (GOST 7827) pneumatic spraying, with a brush or roller.

 

The conditions of the environment, the environment, the temperature, the environment, the temperature, the temperature,

 

Enamel is kept in a warm room before the application.

 

For at least 1 hour at a temperature of (20 ± 2) ° C and (at a temperature of (20 ± 2) ° C for at least 2 75 ± 2) ° C.

 

Prior to commissioning the painted product is recommended to withstand at least 7 days.

 

The thickness of the dried single-layer coating is not less than 20 microns.

 

 

 

The surface of the  substrate has been coated with the surface coating, the surface coating, the surface coating, the surface coating, the surface coating, the thermal dispersion coating.

 

For example, GF-0119 is at least 5 years long.

 

For example, it’s not necessary to say that it has been applied.

 

It has been found that the coatings retain its protective and decorative properties for the UHL1 and T1.

 

 

 

Storage : Enamels should not be stored in tightly closed containers, protected from moisture and direct sunlight. Keep away from fire.

 

 

 

Security measures:  Persons associated with painting protective clothing (workwear, goggles, rubber gloves). Finish, ventilate the room. It doesn’t have a chemical effect. 

 

up