For painting of metal products working in aggressive environments at high temperatures up to +600 ° С.
Silver.
KO-828 enamel is intended for painting metal products, equipment, car parts operating in aggressive environments from -50 ° C to +600 ° C.
Uniform smooth surface without foreign inclusions.
Viscosity conditions for a VZ-246 type viscometer with
a nozzle diameter of 4 mm at a temperature of (20 + 2) ° C, s
… … … … ….
Mass fraction of nonvolatile substances,%
…………….
Drying time at (130 + 2) ° C to degree 3, min, not more than
……………….
The hardness of the coating on a pendulum device
type TML (pendulum type A), sm. units, not less than
……………….
Coating strength at impact, kg / s, cm, not less than
………………..
Adhesion of coating, points, not more than
……………….
Coating resistance to salt fog, h, not less than
……………….
The moisture resistance of the coating, h, not less than
……………….
Thermal stability of enamel film at 600 + 5 ° С, h, not less than
……………….
The specific volume electrical resistance of the
enamel film, at a temperature of (20 + 2) ° С, Ohm * cm
…………….
The surface is cleaned of dirt, rust, scale, loosely holding the old coating and degreased.
KO-828 should be thoroughly mixed, applied to the previously cleaned surface with a brush, roller or paint sprayer
Thinner to working viscosity: solvent or P-646
Enamel consumption with single-layer coating – 80-160 g / m2.
Store in tightly closed containers, protect from moisture, heat and direct sunlight.
Personal protective equipment: rubber gloves and respirator.
Guaranteed shelf life of enamel KO-828 – 12 months from the date of manufacture.
TU, GOST
Enamel
Ferrous metals, Primed metal
Mechanical engineering / Machine-tool
Anticorrosive protection of metal, Wear-resistant coating, Heat-resistant coatings, Car repair materials, For exterior works, For interior works, Quick-drying coating
Moisture resistance, wear resistance, corrosion protection, thermal stability, Atmosferostoykos
CO (silicone