Enamel NC-25

Purpose:

Designed for processing wood and metal products and structures that are used only indoors. Before painting with NTs-25 enamel, a wooden or metal surface must be pretreated with a primer. It is distinguished by SC-25 with fast drying time and versatility in methods of application. It has a smooth and uniform glossy film without foreign inclusions and bubbles.

Application:

To clear a surface of dirt and dust, to process a primer. Enamel can be applied to the surface by spraying. When painting small surfaces can be applied by brush or in bulk. Enamel consumption for single-layer coating 100-150 g / m2. Enamel before use, thoroughly stirred throughout the volume of the container and, if necessary, diluted with solvents grades 645 and 646 according to GOST 18188-72. Work in personal protective equipment using a respirator and rubber gloves. To the workplace to ensure a constant flow of fresh air. Do not allow enamel to enter the respiratory and digestive organs. It is forbidden to work near an open source of fire.

Colour:

Available in white, black, gray blue, yellow brown, golden yellow, light blue, cream and red.

Main factors

Name of the indicator	Norm
The appearance of the film	After drying, the enamel film is smooth, uniform, without wrinkles and foreign inclusions.
Gloss of film,%, not less	50
Conditional viscosity at temperature (20 ± 0,) ° С according to viscometer of type ВЗ-246, с	45-145
Acid number, mg KOH / g enamel, not more than	2
Drying time at temperature (20 ± 2) ° С to degree 3, h, not more	one
Flexural elasticity of the film, mm, not more	3
Film hardness by pendulum device type M-3, conventional units, not less	0,

Warranty period of storage – 1 year from the date of manufacture.