Composition
Enamel is a two-component system consisting of an enamel semi-finished product and a polyisocyanate hardener. Comes in two components.
Purpose (UR-140)
Enamel is intended for painting primed or primed and zashpatlevannyh metal surfaces of various products, including painting large-sized products (railway cars, fuel tank trucks, large-sized automotive equipment – platforms of cars, trailers, etc.). For priming, you can use primers like GF, EP, PF, FL. Recommended primers: GF-0119, EP-045, EP-045K, PF-031.
Application The
surface to be painted must be dry and free from cracks, dust and dirt. Preparation of the surface of products for painting to produce in accordance with the requirements of the TNP on the product or GOST 9.402-80. Before applying the prefabricated enamel mix thoroughly, enter the hardener in the ratio (by weight): per 100 h.h. enamel semi-finished product for glossy floor – 15 inches. hardener, for glossy and high glossy – 20 v.ch. hardener. Mix the enamel thoroughly and hold for 15-30 minutes.
Specifications (UR-140)
Name of the indicator | Value |
Color enamel film | Must be within approved color swatches. |
The appearance of the coating | After drying, the enamel film should be uniform, smooth, flow-free, wrinkle. Small shagreen is allowed. |
Conditional viscosity of enamel p / f according to VZ-246 viscometer (nozzle 4 mm), at temperature (20.0 ± 0.5) ° С, s, not less | 60 |
Mass fraction of non-volatile substances in enamel p / f,% | 58-70 |
The degree of milling p / f enamel, micron, not more for: semi-gloss glossy, highly glossy | 2015 |
Enamel drying time to degree 3 at a temperature of (20 ± 2) ° С, h, not more | 15 |
Enamel film bending elasticity, mm, not more | one |
Enamel film durability at impact on U-1 type device, cm, not less | 50 |
Enamel opacity in terms of dry film, g / m 2 | 65-100 |
Dilution degree to a viscosity of 19-22s using the VZ-246 viscometer (nozzle 4mm),%, not more than | 20 |
Gloss of enamel film by photoelectric gloss meter FB-2,%, for: semi-glossy glossy high glossy | 37-4950-5960 and more |
Adhesion of enamel film, points, not more | one |
Coating resistance to static effects at a temperature of (20 ± 2) ° С, h, not less | |
gasoline | 144 |
water | 120 |
Enamel shelf life at temperature (20 ± 2) ° С, h, not less | 3 |