Parquet Sealant CONTOUR 74

Single component acrylic dispersion sealer.

Properties

Good adhesion to porous surfaces (including wet): wood, gypsum board, plaster, concrete, stone, brick. Plastic. It is well polished. It is painted. Without smell. Does not apply to polyethylene, bitumen, rubber, materials that emit oils and solvents, surfaces that are under water.

Technical data

Consistency	paste
Density	1.47 ± 0.02 g / cm3
Working temperature	+ 5 ° С / + 40 ° С
Film formation time	up to 15 minutes
Cure time	about 2 mm per day *
Allowable deformation	± 7.5%
Heat resistance	-20 ° С / + 80 ° С
Storage temperature	+ 5 ° С / + 30 ° С
Shelf life	24 months
* depending on the layer thickness of air humidity.

 Application:

clean, degrease and, if possible, dry the surface. Trim the cartridge above the thread. Cut off the tip to the width of the seam and screw it onto the cartridge. Extrude with a pistol. Smoothing the seam and removing excess sealant with water is allowed.

Attention!

S2 Keep out of the reach of children! S29 Avoid discharge into drains.

Logistic information

packing	packaging	number on pallet	Colour	barcode	gross weight
plastic cartridge with tip and cap	cardboard box	120 boxes	oak	pieces 4820085760202	pieces 0.46 kg
			Pine	4820085760189
			beech	4820085760875
			the Red tree	4820085760899
			nut	4820085760882
			wenge	4820085765795
280 ml	12 pcs. In the box	1440 pcs.	oak	Drawer 4820085763692	box 5.70 kg
			Pine	4820085763937
			beech	4820085763685
			the Red tree	4820085763708
			nut	4820085763715
			wenge	48.2 billion

 Notes.

It is recommended to protect the seam from exposure to water for 6 hours after application.