Silacryl CONTOUR 73

Single component acrylic dispersion based sealant with silane addition.

Properties:
good adhesion to porous and non-porous surfaces: plaster, brick, concrete, stone, glass, wood, aluminum, steel. Contains fungicides. Plastic-elastic. It is painted. Eco-friendly, odorless. Does not apply to polyethylene, bitumen, rubber, materials that emit oils and solvents, surfaces that are under water.

Technical data

Consistency	paste
Density	1.28 ± 0.02 g / cm3
Working temperature	+ 5 ° С / + 40 ° С
Film formation time	up to 35 minutes – white to 90 minutes – transparent
Cure time	about 2 mm per day *
Solidification time	24 hours*
Allowable deformation	± 12.5%
Heat resistance	-20 ° С / + 60 ° С
Storage temperature	+ 5 ° С / + 30 ° С
Shelf life	24 months
* depending on the layer thickness of air humidity.

Application:
clean, degrease and, if possible, dry the surface. Trim the cartridge above the thread. Cut off the tip to the width of the seam and screw it onto the cartridge. Extrude with a pistol. Smoothing the seam and removing excess sealant with soapy water is allowed.

Attention!
S2 Keep out of the reach of children. S29 Avoid discharge into drains. S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Logistic information

packing	packaging	number on pallet	Colour	barcode	gross weight
plastic cartridge with tip and cap	cardboard box	120 boxes	white	pieces4820085764385	pieces0,42 kg
			transparent	4820085764019	0.30 kg
280 ml	12 pcs. In the box	1440 pcs.	white	box 48200000000	box 5,04 kg
			transparent	48.2 billion	4.08 kg

Notes.
It is recommended to protect the seam from exposure to water for 6 hours after application. Transparent sealant in white cartouche – product becomes transparent after curing.