Belinka Weatherproof Acrylic Facade Paint

The hiding power of bright red, burgundy, yellow, orange and green colors is slightly worse, so usually applying two layers is not enough. In this case, it is recommended to apply a lighter shade with a better hiding power as the first layer, and then apply another 2 coats of the selected color shade. The perfect final look is achieved by following the instructions. Depending on the absorption and roughness of the surface, as well as the effect of light, the color of the coating after application may differ from the initially chosen tone. When choosing a color shade, it is recommended to select lighter tones, providing a longer color film service life. Stains from the coating can be removed with a soft cloth and light non-abrasive cleaners.

Application

Before applying Belinka acrylic facade paint, you must prepare the surface accordingly. Fresh concrete or freshly applied plaster should dry well before painting. Before applying the acrylic facade paint the surface should be treated with Belinka universal acrylic primer. Surfaces already coated should be cleaned with a brush and / or washed with water with the addition of a cleaning agent. Old cracked or flaking coatings must be removed to a solid base. Coarse and uneven surfaces should be leveled using a leveling compound similar to the base and wait until completely dry. Thus, the prepared and cleaned surface is treated with Belinka universal acrylic primer. Wall surfaces contaminated with mold or fungus before applying the primer should be treated with Belinka mold remover. After drying, dead fungi and mold are mechanically removed. Mix well before applying. If necessary, dilute with water by 5-10%. The paint is applied with a brush, fur roller with a long pile or spray on a dry surface in 2 layers. During application and drying, the temperature of the paint, substrate and air should not be below + 5 ° C, the relative humidity of the air should not exceed 80%. Paint should not be applied during rain, fog or strong wind. In sunny weather, the facade must be protected from direct sunlight to prevent uneven drying, as this affects the quality of the coating. Under normal conditions (20 ° C and 65% relative humidity), the next paint coat can be applied after 6-10 hours. At low temperatures, the drying time increases. Drying time also increases with increasing relative humidity. The tool after work is cleaned with water.

Specifications

Composition : Acrylate copolymer, pigment, fillers, special additives and water.  Method of application : brush, roller, spraying  Recommended number of layers : 2  Consumption : 1 liter per 3-4 m ^{2 of}  smooth base when applied in two layers. When coating highly absorbent and rough bases, consumption increases. Drying time before applying the next layer : under normal conditions (20 ° C and relative air humidity 65%), the next layer can be applied in 6-10 hours. Storage : in its original packaging at a temperature of + 5-30 ° C. Prevent freezing! Package : 2 l and 10 l