The final appearance depends on the base. The coating will look beautiful and smooth if applied on a well-leveled surface. Stains can be removed with a soft cloth and light non-abrasive cleaning agents. Glossy coatings are better cleaned. Depending on the absorption and roughness of the surface, as well as the effect of light, the color of the coating after application may differ from the initially chosen tone.
Application
Before applying Belinka latex paint, it is necessary to prepare the surface accordingly. Fresh concrete or freshly applied plaster should dry well for at least 28 days before painting. Before applying latex paint for walls, the surface should be treated with Belinka universal acrylic primer. Surfaces already coated should be cleaned with a brush and / or washed with water with the addition of a cleaning agent. Old cracked or peeling coatings must be mechanically removed and the surface treated with Belinka universal acrylic primer. Surfaces infected with mold or fungus should be treated with Belinka mold remover before applying the primer. After drying, dead fungi and mold are mechanically removed. Serious damage and cracks should be repaired with appropriate mineral putty. Mix well before applying. The paint is applied by brush, roller or by spraying (nozzle diameter 1.3 mm, working pressure 1.8 bar) on a dry surface in 2 layers. For the application of the first layer of paint, if necessary, dilute with 20% water. During application and drying, the temperature of the paint, substrate and air should not be below + 5 ° C, the relative humidity of the air should not exceed 80%. Under normal conditions (20 ° C and 65% relative humidity), after 5 hours, you can apply the next layer of latex paint, if necessary, previously diluted with a maximum of 10% water (when spraying a maximum of 20%). At low temperatures, the drying time increases. Drying time also increases with increasing relative humidity. The tool after work is cleaned with water.
Specifications
Composition : acrylic copolymer dispersion, pigment, fillers, special additives and water. Consumption : 1 liter for 7-9 m 2 when applied in two layers. When painting highly absorbent and rough surfaces, consumption increases. Storage : in its original packaging at a temperature of +5 – + 30 ° C. Do not freeze!