The effect of the coating increases, it is recommended to apply 2 layers. Protective clothing and gloves. Dispose of empty packaging and packaging.
Application
Before applying the surface. Fresh concrete or freshly applied plaster. Before applying the paint with a universal acrylic primer. It should be cleaned with a brush and / or washed with water. Belinka universal acrylic primer. Surfaces infected with mold or fungus should be treated with mold remover before using the primer. After drying, dead fungi and mold are mechanically removed.Serious damage and cracks should be repaired with appropriate mineral putty. Before applying the paint should be well mixed and, if necessary, diluted with water (max. 5%). Paint is applied with a brush or roller on a dry surface in 2 layers. During application and drying, the temperature of the paint, substrate and air should not be below + 5 ° C, the relative humidity of the air should not exceed 80%. Under normal conditions (20 ° C and 65% relative humidity), the next coat of paint can be applied after 6 hours. At low temperatures, the drying time increases. Drying time also increases with increasing relative humidity. The tool after work is cleaned with water. Before applying it should be diluted with water (max. 5%). Paint it over with 2 layers. Air temperature should not be below + 5 ° C, it should not exceed 80%. Under normal conditions (20 ° C and 65% relative humidity), it can be applied after 6 hours. At low temperatures, the drying time increases. Drying time also increases with relative humidity. The tool after work is cleaned with water. Before applying it should be diluted with water (max. 5%).Paint it over with 2 layers. Air temperature should not be below + 5 ° C, it should not exceed 80%. Under normal conditions (20 ° C and 65% relative humidity), it can be applied after 6 hours. At low temperatures, the drying time increases. Drying time also increases with relative humidity. The tool after work is cleaned with water. relative humidity should not exceed 80%. Under normal conditions (20 ° C and 65% relative humidity), it can be applied after 6 hours. At low temperatures, the drying time increases.Drying time also increases with relative humidity. The tool after work is cleaned with water. relative humidity should not exceed 80%. Under normal conditions (20 ° C and 65% relative humidity), it can be applied after 6 hours. At low temperatures, the drying time increases. Drying time also increases with relative humidity. The tool after work is cleaned with water.
Specifications
Composition : copolymer dispersion of vinyl acetate, pigment, fillers, special additives and water. Consumption : 1 liter for 5-6 m 2 when applied in two layers. When dyeing highly absorbent and rough surfaces, consumption increases. Storage : in original packaging at a temperature of +5 – +30 o C. Avoid freezing!