PF-837 enamel
October 2, 2018Enamel URF-1128
October 2, 2018
Enamel PF-223
Structure: Suspension of pigments in a pentaphtol varnish with addition of solvents and a sikkativa.
Purpose (PF-223)
Coloring of metal and wooden products and objects that are not exposed to weathering.
Application
- Enamel is applied to the surface with a paint sprayer, brush or spray in an electrostatic field. Before use, the enamel is diluted to working viscosity with white spirit, xylene, solvent or their mixture. When spraying enamel in an electrostatic field, it is diluted with diluent RE-4B.
Specifications (PF-223)
| Name of the indicator | Value |
| Name | Value |
| Enamel colors | white, black, red, yellow, green, dark gray, dark blue, etc. in total more than 20 colors |
| Drying time to degree 3 at a temperature of (20 ± 2) ° С, h, not more | |
| black, red, dark blue | 36 |
| other colors | 24 |
| Drying time to degree 4 at a temperature of 75-80 ° C, h, not more | |
| black | four |
| other colors | 3 |
| Flexural elasticity of the film, mm, not more | one |
| The strength of the film when struck on the device type U-1, cm, not less | 50 |
| Film hardness by pendulum device type M-3, used, no less | |
| black red | 0.2 |
| other colors | 0.3 |
| Hiding power of dried enamel film, g / m2, not more than: | |
| black | 20 |
| green, dark blue | 60 |
| white | 240 |
| red | 110 |
| yellow | 130 |
| dark gray, greenish gray | 75 |
| Coating resistance to static effects at (20 ± 2) ° С, h, not less | |
| water | 3 |
| mineral oil | 24 |
| gasoline | 6 |
