Enamel PF-223
October 2, 2018Enamel UR-140
October 2, 2018
Enamel URF-1128
APPOINTMENT:
Enamel URF-1128 is used for painting the surface of various products, including urban and freight transport and car-building products, which are operated in atmospheric conditions and indoors.
Продукт уже в Списке Желаний!
Watch Wishlist
SPECIFICATIONS:
| The appearance of the coating | After drying, it must be a smooth, uniform, smooth, glossy surface without any inclusions. Small shagreen is allowed. |
| Enamel coating color | Hue is not standardized. Must be established for the samples. |
| red | 6.46 |
| blue | 427,428 |
| yellow | 223,287 |
| green | Color control samples |
| Conventional viscosity with a nozzle diameter of 4 mm at a temperature of (20.0 + 0.5) 0 С, s, no less | 50-90 |
| Mass fraction of nonvolatile substances,% | |
| black | 45 + 3 |
| green blue | 52 + 3 |
| white, red, yellow | 57 + 3 |
| Milling degree, µm, not more | 20 |
| Drying time to degree 3, h, not more, at a temperature: | |
| (20+ 2) оС | 6 |
| (80+ 2) оС | 0.5 |
| Hiding power of dried film, g / m2, not more than for enamels: | |
| black | 60 |
| red, blue, green | 95 |
| white yellow | 130 |
| Flexural elasticity of the film, mm, not more | one |
| Adhesion of film, points, not more | 2 |
| Film hardness, relative units, not less, by pendulum device: TML (pendulum A) | 0.25 |
| Gloss of film,%, not less | 55 |
| Coating strength at impact on U-1 device, cm, not less | 50 |
APPLICATION:
Xylene, solvent or white spirit. It can be used from 35–40 s.
Enamel consumption – 60-100 g / m2 for a single-layer coating.
Enamels are applied to the pre-primed surface by spraying or brushing.
Enamels are used on FL-03K, GF-021, AU-021 and EF-065.
STORAGE:
Warranty storage period – 6 months from the date of manufacture.
