Primer “Aurora Express”
September 3, 2018
Clay 88 SA
September 3, 2018

Glue 88 NP

Glue 88-NP is perfectly resistant to various kinds of all kinds of mechanical stress and manipulation at temperatures from -500 degrees to + 700 degrees. 

Glue 88 NP (rubber)

according to TU 13.105-540-85

Quality indicators:

No Name of the indicator Norm according to TU 38 105 540-85
one Appearance Viscous and flowing mass from light yellow to light brown (at a temperature not lower than 150 ° C)
2 Uniformity Homogeneous
3 Relative viscosity by viscometer VZ-1 (nozzle diameter 5.4 mm), s, within 15-40
four The bond strength of rubber P-56,56 (TU 380051166-98) with steel St-3 (GOST 380-94) or aluminum alloy D-16 (GOST 21488-97, GOST 211631-76) 24 hours after gluing at a temperature (23 ± 5) 0С:
4.1 When peeling, N / mm (kgf / cm), not less 2.26 (2.3)
4.2 At separation, MPa (kgf / cm2) not less 1.18 (12.0)
five The rate of peeling of rubber P-56 from aluminum alloy D-16 or steel St-3 after (24 ± 0.5) hours after gluing with glue under the effect of peeling load (0.31 ± 0.05) N / mm (0.32 ± 0.06) kgf / cm at a temperature of (70 ± 2) 0С, cm / min, not more 0.6

Directions for use.
During transportation and storage at temperatures below 150 ° C, the adhesive crystallizes. When using such an adhesive for its intended purpose, it must be kept at a temperature of (23 ± 5) 0С for (10 ± 2) days, stirring with a wooden oar at least twice a day (3 ± 1_ minutes)

It is allowed to warm up the container with warm air glue, having a temperature of (50 ± 10) 0 С, until the glue is completely liquefied.

Before use, the adhesive should be thoroughly mixed, and its temperature should not be below 180 ° C.

Transportation and storage.
Glue 88-NP can be transported by any type of transport that ensures the conditions of transportation of flammable goods in compliance with the rules of transportation established on this type of transport.

Glue should be stored in a hermetically sealed container, in a room specifically designed for the storage of flammable materials at a temperature of 0-300 C.

Manufacturer’s warranty.
The manufacturer guarantees the adherence of the adhesive to the requirements of these specifications, subject to the conditions of transportation and storage established by the specifications.

The warranty storage period for glue is 6 months from the date of manufacture.

After the warranty period of storage, the adhesive can be used for its intended purpose only after checking the quality of the adhesive for compliance with the requirements of the Technical Specifications. 

up