Enamel HV-124
October 2, 2018Enamel HV-785
October 2, 2018
Enamel HV-16
Properties of enamel on the basis of perchlorovinyl and glyptal resins with the addition of a plasticizer in a mixture of organic solvents. Enamels XB-16, XB-16r – quick-drying, dry at room temperature. The coating system, consisting of two layers of enamel XB-16, XB-16p, applied to the surface primed with GF-0119 primer, retains its protective properties in a temperate climate for at least 3 years, and when applied in 3 layers on a primer – not less 6 years. Enamels HV-16, HV-16r are flammable and toxic, due to the properties of the solvents. In the dry form, after the end of the work has no toxic effects on the human body.
Purpose (HV-16)
This is a coloring of the colors. In addition, it can be covered with wood, wood surfaces, concrete and reinforced concrete building structures. Enamel XB 16 protects your skin. Differ in high water and weather resistance.
Application
The surface must be cleaned from dirt, dust, old paint and corrosion. Before use, the HV-16 should be thoroughly mixed. If necessary, you can use the solvent P-5, P-5A, P-4, P4A. Enamels are applied to each other. The consumption of three layers – (500-600) g / m2. The enamel HV-16 silver is supplied in complete sets for 100 inches. bases – 5th century. powder aluminum PAP-2. Mixing is done immediately before use. Work in personal protective equipment using a rubber gloves. It is forbidden to work. Provide a supply of fresh air to the workplace.Prevent material from inside.
Technical characteristics (HV-16)
| No | Name of the indicator | Value |
| one | Film color | Cardinality of standards of standards for cardinality or standards of cardinality. |
| 2 | The appearance of the film | Without wrinkles, pockmarks, potek and extraneous inclusions. |
| 3 | VZ-246 with a nozzle diameter of 4 mm, at a temperature of (20.0 ± 0.5) ° C, not more than, (s) | 16-48 (depending on color) |
| four | Mass fraction of nonvolatile substances, (%) | 14-31 (depending on color) |
| five | Drying time to degree 3 at a temperature of (20 ± 2) ° C, (h) | 15 |
