Products

Enamel KO-811
October 2, 2018
Enamel KO-814
October 2, 2018

Enamel KO-813

Composition
Enamel KO 813 is prepared by mixing 94 parts of varnish KO-815 and 6 parts of aluminum powder and using it within 8 hours after preparation. 

Categories: ,

Purpose (KO-813)
KO 813 is designed for protective (anti-corrosion) painting of steam pipelines with superheated steam, heat pipes, process pipelines, oil pipelines, gas pipelines, metal chimneys, vehicle exhaust systems, engine parts, ship hulls and mechanisms, metal roofing and metal structures .

Application
KO 813 enamel prepared for application can be applied with a paint sprayer (pneumatic or airless), roller, brush, dipping. When spraying, the nozzle diameter should be 1.8-2.5 mm. The distance from the nozzle of the paint sprayer to the surface to be painted should be 200-300 mm, depending on the air pressure and the diameter of the nozzle.

Specifications (KO-813)

No Name of the indicator Value
one Conditional viscosity according to the viscometer of the type VZ-246 with a nozzle diameter of 4 mm, at a temperature of (20.0 ± 0.5) ° C, not more than, (s) 25
2 Mass fraction of nonvolatile substances, not less, (%) 55
3 The degree of dilution of the enamel to the working viscosity of 15 s. on the VZ-246 viscometer with a nozzle diameter of 4.0 mm at a temperature of (20 ± 2) ° С, not less, (%). 50-80
four The strength of the coating at the ular instrument U-2, not less, (cm) 40
five Adhesion of coating according to the method of lattice cuts, not more, (points) 1.0
6 Enamel film heat resistance at temperature up to 600 ° С, not less, (h) 3
7 Enamel film resistance to salt spray, no less, (h) 96
eight Drying time to degree 3 at a temperature of (20 ± 2) ° С, at (150 ± 2) ° С, (h) 20.5
9 Moisture resistance of the film, not less, (h) 150
ten Enamel film resistance to static exposure at a temperature of (20 ± 0.2) ° С, not less than, (h) Water – at least 100
Gasoline – at least 48
Mineral oil – at least 48 
up